1. Position and secure with tape

-Tape the lettering in place along the entire long edge. Double check that it is level and in the correct location.

2. Cut the Vinyl Lettering Between the Letters.

-You can cut between every letter, or cut into whatever size pieces you are comfortable installing at once.
-Needs to have spaces between letters.

3. Remove the Liner

-Lift the lettering. -Remove the liner.

4. Apply the Lettering

-Repeat steps 3 and 4 for each section.

5. Remove the Transfer Tape

-Make sure the lettering is firmly pressed onto your surface before you remove the tape.